The wiring of your home network is a great DIY project and it’s not difficult to do. As long as you have the right tools and know what you’re doing, it should be easy! We’ve created this article to provide an overview of how to wire a home network if you want to find out more information then it is recommended that you Visit Website. It’ll provide you with some tools and tips to ensure the project is a success.
Tips to wiring your home network
Buy the right cable for each job. If you’re running cables within walls, in most cases it’s fine to use standard Cat-five/Cat-six RJ45 cabling (the same stuff used by Internet service providers). For cross connects or patch panels, opt for something more durable like plenum grade cable. If you buy bulk cable and the inner plastic sheath is an orange color, that’s plenum grade.
Don’t skimp on tools! Invest in a good pair of crimpers plus wire strippers when using solid core copper or aluminum wires; if you are using stranded wire then any cheap tool will do just fine. It helps to have three different kinds of screwdrivers: Phillips, flat head, and star shaped. If you don’t already have these tools in your tool kit, they are well worth the investment.
-Keep everything organized! Nothing is worse than being half way through a project only to realize that you’re missing an important wire or connector. You should always label wires as soon as they are installed so there’s no confusion later on when it comes time to connect them all together. Use different colored electrical tape for each category of wiring (for example Cat-five/Cat-six cables could be blue while cross connects would use red).
Ensure proper support!. A home network can require anywhere from one to hundreds of connections depending on how wired out your house is. It may not seem like much but if you’re running cables in walls, it can add up quickly. Always make sure the wall studs behind the drywall provide sufficient support for all of your new wires or else they’ll sag and become damaged.
Test before moving on!. This may seem like a no-brainer but always test each connection to ensure that everything is working properly BEFORE finishing off any wiring/connecting processes; if not, there’s nothing worse than having finished an entire project only to find out one cable isn’t connected correctly! Trust us, we know from experience (more than once)!
Things to avoid while wiring your home network
Don’t run cables near power lines! This is a big one and the consequences can be deadly. Wires should always be at least six feet away from electrical wiring, even if it’s not currently in use; this includes lights as well as outlets that are wired for power. If you have to cross paths with an existing cable or wire then make sure they’re at least three feet apart (this distance varies due to different countries).
Avoid cutting corners when buying materials!. It might seem like common sense but there’s nothing more frustrating than spending hours installing high speed internet only to find out your router acts up because of cheap wires/connectors used throughout your house. You get what pay for so don’t try to save money by buying cheap materials.
Be careful when working with network cables! Network cable consists of eight wires that are extremely thin, fragile, and can be easily damaged if not handled properly during installation. For example, don’t kink the wire or pull on it too hard; this causes damage to the individual wires inside which will lead to signal loss later down the line. Try using a fish tape instead for pulling long lengths of cabling through walls or floors (wherever you are installing them).
Remember that quality matters!. You can save money by purchasing cheap materials but it will only lead to trouble further down the line; this is especially true if you plan on wiring your house with Cat-five/six cable. It might be tempting to buy bulk cable at an incredibly low price (in order cut back on costs) but these cables are made of poor quality and may start acting up within just a few short weeks or months after installation. This leads us into our next point…
Give yourself plenty of time!. If you’re wiring your house then take into account that it’s not an easy task and will require several hours worth restarts/unstalling software etc. It might seem like common sense but if you’re in need of help feel free to leave us a comment below or contact our support team directly via email ([email protected]). We’d be more than happy to help get everything wired correctly so good luck with wiring your home network!
Don’t run cables near power lines! Wires should always be at least six feet away from electrical wiring, even if it’s not currently in use; this includes lights as well as outlets that are wired for power. If you have to cross paths with an existing cable or wire then make sure they’re at least three feet apart (this distance varies due to different countries).
